套管双壳程连续螺旋折流板换热器性能数值模拟的研究.pdfVIP

第33 卷 第14 期 中 国 电 机 工 程 学 报 Vol.33 No.14 May 15, 2013 82 2013 年5 月15 日 Proceedings of the CSEE ©2013 Chin.Soc.for Elec.Eng. 文章编号：0258-8013 (2013) 14-0082-06 中图分类号：TK 124 文献标志码：A 学科分类号：470·10 套管双壳程连续螺旋折流板换热器 性能数值模拟研究 宋素芳 (太原科技大学化学与生物工程学院，山西省 太原市 030021) Numerical Studies on Performance of Double Shell-pass Heat Exchangers With Sleeve Tubes and Continuous Helical Baffles SONG Sufang (Institute of Chemical and Biological Technology, Taiyuan University of Science and Technology, Taiyuan 030021, Shanxi Province, China) ABSTRACT: A novel double shell-pass heat exchanger with 解器，SIMPLE 算法，k-ε 湍流模型，借用CFD 软件FLUENT sleeve tube and continuous helical baffles was proposed. The 对套管双壳程连续螺旋折流板换热器和传统弓形折流板及 sleeve tube was applied to separate the shell-pass into two 传统单壳程连续螺旋折流板换热器壳程流动和换热特性进 parts, the inner one having no baffles and the external one with 行模拟研究，结果表明：相同壳程进口流速下，套管双壳程 helical baffles. Based on the 3-dimensional physical model of 连续螺旋折流板换热器的壳程压力降比弓形折流板和单壳 the heat exchangers, with the k-ε turbulent model, SIMPLE 程连续螺旋折流板换热器降低平均值分别为 62.17% 和 pressure-velocity coupling algorithm and segregated solver, the 22.76% ，传热速率比这两种换热器均提高了 25.98% 和 flow and heat transfer characteristics of the novel double 21.79% ，单位传热量的压力降相比于这两种换热器降低平 shell-pass heat exchanger with sleeve tube and continuous 均值分别为68.93%和38.69% 。 helical baffles were studied by means of computational fluid 关键词：螺旋折流板换热器；双壳程；压力降；传热速率； dynamics (CFD) software. The results indicate that, under same 数值模拟 vel