消除单相磁通切换型磁阻电机启动死区的新型转子结构及实验的研究.pdfVIP

第 35 卷 第 18 期 中 国 电 机 工 程 学 报 Vol.35 No.18 Sep.20, 2015 4762 2015 年 9 月 20 日 Proceedings of the CSEE ©2015 Chin.Soc.for Elec.Eng. 4779 DOI ：10.13334/j.0258-8013.pcsee.2015.18.026 文章编号：0258-8013 (2015) 18-4779-11 中图分类号：TM 352 消除单相磁通切换型磁阻电机启动死区的 新型转子结构及其实验研究 张宗盛，王秀和，杨玉波 ( 山东大学电气工程学院，山东省 济南市 250061) Novel Rotor Structure and Experimental Research for Eliminating the Starting Dead Zone of Single-phase Flux Switching Motors ZHANG Zongsheng, WANG Xiuhe, YANG Yubo (School of Electrical Engineering, Shandong University, Jinan 250061, Shandong Province, China) ABSTRACT: In order to eliminate the starting dead zone of 样机及控制器并进行了实验测试。仿真分析与实验测试结果 single-phase flux switching motor (FSM), this paper presents a 表明，该文所设计的新型转子结构实现了消除单相 FSM 启 novel rotor design scheme. The working principle and the 动死区的研究目标，具有很好的实用价值。 existed method of weakening or eliminating the starting dead 关键词：单相磁通切换型磁阻电机；启动死区；错位装配； zone for single-phase FSM were analyzed. Base on the analysis, 3D 有限元仿真；实验研究 a misalignment assembly scheme of the rotor was presented and two kinds of misalignment assembly rotor structure was 0 引言 analyzed using 3D finite element analysis. The analysis proves 磁通切换型磁阻电机(flux switching motor ， that the rotor contains two different pole arc length laminations FSM)是 20 世纪 90 年代出现的一种新型双凸极电 is more practical. The control circuit and control method for the single-phase FSM with the new rotor were discussed, and the 机，FSM 是在开关磁