磁通反向式永磁电机性能计算和转矩脉动削弱措施的研究.pdfVIP

第 35 卷 第 11 期 中 国 电 机 工 程 学 报 Vol.35 No.11 Jun.5, 2015 2838 2015 年 6 月 5 日 Proceedings of the CSEE ©2015 Chin.Soc.for Elec.Eng. DOI ：10.13334/j.0258-8013.pcsee.2015.11.023 文章编号：0258-8013 (2015) 11-2838-09 中图分类号：TM 351 磁通反向式永磁电机性能计算与 转矩脉动削弱措施研究 杨玉波，王秀和，张宗盛，李光友 ( 山东大学电气工程学院，山东省 济南市 250061) The Performance Analytical Calculation and the Torque Ripple Reduction Methods of Flux Reversal Machine YANG Yubo, WANG Xiuhe, ZHANG Zongsheng, LI Guangyou (School of Electrical Engineering, Shandong University, Jinan 250061, Shandong Province, China) ABSTRACT: In order to improve the power density of flux 电机性能之间的关系，计算速度快，特别适用于电机的初始 reversal machine (FRM), two kinds of distributed winding 设计和优化计算。 topologies were proposed in this paper. The magnetic field and 关键词：磁通反向式永磁电机；子域法；解析法；有限元法； electromagnetic performance was calculated and compared 齿槽转矩；分布式绕组 with the analytical models by the subdomain method. The results show that the power density can be greatly improved with 0 引言 the distributed windings than that with concentrated windings. The effect of geometrical parameters including the permanent 磁通反向式永磁电机(flux reversal machine ， magnet (PM) width, the included angle between the PMs and FRM)是一种集永磁电机和开关磁阻电机优点于一 the rotor slot width angle on the torque ripple was also studied, 体的新型电机。FRM 将永磁体和绕组放置在定子 and the torque ripple reduction method was advised. At last, the 上，转子由硅钢片叠压而成，具有结构简单可靠、 analytical model was verified with finite element method 散热性好、绕组利用率高、电感小和转动惯量