基于C52单片机花房温湿度控制系统的是合计与仿真精要.docVIP

本科毕业论文（设计）基于C52单片机花房温湿控制系统的设计与仿真1042053233 专 业: 通信工程 院 系: 电子通信工程学院 指导老师: 史道玲 职称学位: 讲师/硕士 完成时间: 2014年5月 教务处制安徽新华学院本科毕业论文（设计）独创承诺书 本人按照毕业论文（设计）进度计划积极开展实验（调查）研究活动，实事求是地做好实验（调查）记录，所呈交的毕业论文（设计）是我个人在导师指导下进行的研究工作及取得的研究成果。据我所知，除文中特别加以标注引用参考文献资料外，论文（设计）中所有数据均为自己研究成果，不包含其他人已经发表或撰写过的研究成果。与我一同工作的同志对本研究所做的工作已在论文中作了明确说明并表示谢意。 毕业论文（设计）作者签名： 日期： C52单片机花房温湿控制系统的设计与仿真 摘 要 随着花卉产业的不断升级温室花房的作用越来越大它不仅能为人们带来一定的经济效益同时也能一年四季种植出人们所需要的各种花卉。在温室花房中，最关键的是怎样对温湿度进行控制。 本文旨在论述温室花房温湿度控制系统的设计及工作原理该系统主要由AT89C52单片机、温湿度传感器SHT10、液晶显示LM0160L等芯片构成。可通过对温室内的温湿度进行采集并通过AT89C52单片机处理，从而把温湿度值显示在液晶显示屏上，并实时判断该温湿度值是否满足设定的温湿度范围，若超过设置范围则启动温湿度控制系统如喷水、吹风、加热等将温室内的温湿度控制在一定范围内。 关键词：温湿度采集；LCD显示；单片机；蜂鸣器独立按键Design and Simulation of Greenhouse Temperature and Humidity Control System Based on C52 Single Chip Computer Abstract With the continuous upgrade of flower industry, the roles of greenhouse become more and more important. It can not only bring certain economic benefits, but also can plant a variety of flowers that people need all the year round. In addition, the most important aspect is how to control the temperature and humidity in the greenhouses. This article aims to discuss the design and working principle of greenhouse temperature and humidity control system. The system is mainly composed of AT89C52 single chip computer, temperature and humidity sensor SHT10, liquid crystal display LM0160L and other chips. When the temperature and humidity inside the greenhouse are collected and then processed by AT89C52 single chip computer, thus the values of temperature and humidity are displayed on the LCD screen. At the same time, the values could be determined real-time whether it meets the set range of temperature and humidity. Once it exceeds the set range, the temperature and humidity control systems would start, the temperature and humidity inside the greenhouse would be