el1883--视频同步分离器.pdf

EL1883 ® Data Sheet April 24, 2006 FN7010.2 Sync Separator with Horizontal Output Features The EL1883 video sync separator is manufactured using • NTSC, PAL, SECAM, non-standard video sync separation Elantec’s high performance analog CMOS process. This • Fixed 70mV slicing of video input levels from 0.5VP-P to device extracts sync timing information from both standard 2VP-P and non-standard video input and also in the presence of Macrovision pulses. It provides composite sync, vertical • Low supply current - 1.5mA typ. sync, burst/back porch timing, and horizontal outputs. Fixed • Single 3V to 5V supply 70mV sync tip slicing provides sync edge detection when the video input level is between 0.5VP-P and 2VP-P (sync tip • Composite sync output amplitude 143mV to 572mV). A single external resistor sets • Vertical output all internal timing to adjust for various video standards. The • Horizontal output composite sync output follows video in sync pulses and a vertical sync pulse is output on the rising edge of the first • Burst/back porch output vertical serration following the vertical pre-equalizing string. • Macrovision compatible For non-standard vertical inputs, a default vertical pulse is output when the vertical signal stays low for longer than the • Available in 8-pin SO package verti