发电机穿转子作业指导书资料.docVIP

目 录 Content 目 录 1 Content 1 1.编制依据 Basis of Compilation 1 2.工程概况、工程量 Engineering Situation and Quantity 1 3.施工作业进度及人员、材料准备 2 Construction Schedule, Personnel and Material Preparation 2 3.1技术资料准备 Preparation for Technical Data 2 3.2作业人员配置 Personnel Allocation 2 3.3作业工机具准备 Machine Preparation 2 3.4安全设备准备 Safety Equipment Preparation 2 3.5其他准备 Other Preparation 3 4．施工作业流程及施工方法、步骤 3 4.1 施工作业流程 Construction Process 3 4.2发电机穿转子Generator Rotor Installation 3 5．施工质量要求及保证措施 8 Quality Requirements and Assurance Measure 8 5.1质量要求Quality Requirements 8 5.2质量保证措施 Quality Assurance Measure 9 6．施工安全注意事项 Safety Consideration During Construction 9 6.1一般要求 General Requirements 10 6.2.施工用电及照明 Construction Electricity and Lighting 10 6.3.防火 Fire Protection 10 6.4.设备起吊 Equipment lifting 11 6.5工器具使用 Facilities Using 11 7.文明施工 Civilized construction 12 8.ITP检验试验项目 Inspection and Test Plan (ITP) 12 1.编制依据 Basis of Compilation 1.1印尼ADIPALA工程机组安装施工组织设计 Construction Organization Design on Adipala Unit Installation, Indonesia. 1.2 上海电气电站设备有限公司上海发电机厂家图纸、产品证明文件、产品说明书、安装手册。转子穿装方法。 Shanghai generator Drawing, product certificate, product specification, installation notebook supplied from Shanghai electric power generation equipment CO., LTD. “METHOD OF INSTALLING ROTOR, DWG. NO.: AD/YQ0D412.064.01” 1.3 阿迪帕拉电站EPC合同 EPC Contract for PLTU 2, Adipala 1.4 IEC 60034 2.工程概况、工程量 Engineering Situation and Quantity 印尼ADIPALA工程安装一台由上海电气电站设备有限公司上海发电机厂家生产的QFSN-660-2型、静止励磁、三相交流隐极式同步发电机，额定功率660MW。发电机纵向布置在汽机间13.70m运行平台上，其纵向中心距A轴15300mm，距B轴15300mm。横向中心位于3～4线之间，转子中心标高为14770mm，其汽侧朝向扩建端。 This unit for Adipala Power Plant, Indonesia is static excitation, three-phase AC synchronous generator and made by Shanghai electric power generation equipment CO., LTD. Its rated power is 660MW and type is QFSN-660-2. Generator shall be vertically arranged on ele.13.7m operation platform in turbine house. The distance from longitudinal center to axial is 15300mm; the distance from longitudinal center to axial is