局部单双层网壳结构的参数分析.pdfVIP

第 26 卷增刊 I Vol.26 Sup. I 工 程 力 学 2009 年 6 月 June 2009 ENGINEERING MECHANICS 7 文章编号：1000-4750(2009)Sup.I-0007-05 局部单双层网壳结构的参数分析 * 1 1 1 2 肖建春 ，胡 滨 ，马克俭 ，樊 剑 (1. 贵州大学空间结构研究所，贵州，贵阳 550003 ；2. 华中科技大学土木工程与力学学院，湖北，武汉 430074) 摘 要：为考虑设计变量之间的相互作用和荷载组合的影响，采用均匀设计法进行局部单层、双层网壳的参数分 析。考虑了网壳矢高、单层范围面积、单层部分杆件的设计应力比等设计变量。使用较少的计算实验次数，得到 材料用量、最大位移、基本频率和屈曲荷载的反应面近似函数，以及变量、组合变量的显著性顺序。局部单双层 六边形网壳的材料用量和屈曲荷载受单层范围面积影响最大。预应力局部单层、双层六边形网壳的材料用量和屈 曲荷载受单层部分杆件的设计应力比影响最明显。 关键词：网壳；参数分析；均匀设计；局部单双层；预应力 中图分类号：TU356 文献标识码：A PARAMETRIC ANALYSIS OF PARTIALLY SINGLE-LAYERED RETICULATED SHELLS * 1 1 1 2 XIAO Jian-chun , HU Bin , MA Ke-jian , FAN Jian (1. Institute of Space Structures, Guizhou University, Guiyang, Guizhou 550003, China; 2. College of Civil Engineering Mechanics, Huazhong University of Science Technology, Wuhan, Hubei 430074) Abstract: To consider the interactions among design variables and the influence of load combinations, a uniform design method is adopted to make the parametric analysis of partially single-layered reticulated shells. Design variables, such as the shell rise, the area of the single-layer region, and the design stress ratio for single-layer members are considered. The approximate response surface functions of the amount of materials, the maximum deflection, the fundamental frequency and the buckling load are gained with a few numbers of computational experiments. The significance orders of design variables and combined va