环氧树脂选择对其改性水性树脂涂料漆膜性能影响本科生毕业（设计）论文.doc

广州大学 本科毕业论文 课题名称 环氧树脂选择对其改性水性树脂涂料漆膜性能影响 学 院 化学化工学院 专 业 化学工程与工艺（精细化工） 班级名称 11精细化工班 学生姓名 朱海 学 号 1105200077 指导老师 刘晓国 完成日期 2015年4月8日 环氧树脂选择对其改性水性树脂涂料漆膜性能影响 摘要 本实验选择高环氧值、低粘度的环氧树脂和双键的制得环氧For the modified epoxy resin water-based resin coating film performance impact ABSTRACT This experiment select high epoxide value and low viscosity epoxy resin Der671 with carboxyl and double bond of malefic anhydride reaction made epoxy malefic acid ester EA, then a double bond in the EA resin and acryl ate double bond polymerization synthesis of epoxy modified acrylic resin. And the EA and epoxy modified acrylic resin solid content, viscosity, PH and other performance testing, to ensure that the correct reaction, get qualified epoxy malefic acid ester EA and epoxy modified acrylic resin. And resin materials for preparation of varnish, performance testing, make sure to get to the actual use of indicators. Spraying, baking paint film system, determination of the hardness, adhesion, water resistance and alkali resistance, such as performance, this research epoxy resin content on the influence of water soluble modified acrylic resin coatings film performance. The optimum formulation of epoxy modified acrylic resin. The experimental results show that the dosage of epoxy resin content in epoxy adhesion and hardness of the water soluble modified acrylic resin coating effect is not big, but can cause obvious change to the water resistance and alkali resistance. The appropriate formula can be obtained water-soluble, weathering resistance and mechanical properties are very good water-soluble epoxy modified acrylic resin coating. Keywords Epoxy resin, water-borne acrylic resin, paint film performance 目 录 1.前 言 1 1.1 水溶性涂料的现状分析 1 1.2 水溶性涂料的特点 2 1.3与选题相关的国内外研究和发展概况 2 1.4 本课题的研究目的和意义 3 1.5 研究方法及要达到的要求 4 2.理论分析 4 2.1 水性环氧改性丙烯酸树脂合成的原料的选择 4 2.2 温度