西商高速公路c11合同段施工图设计大学生毕业（设计）论文说明书.docVIP

西商高速公路C11合同段施工图设计 摘要：西安至商州高速公路C11合同段km/h，路基宽度24.5m，采用沥青混凝土路面进行设计。设计内容包括三维空间设计（平面设计、纵断面设计、横断面设计），路面结构设计（沥青混凝土路面）、防护工程设计（挡土墙等）、排水设施设计。平面设计内容包括公路路线的选择、平面线形的绘制、曲线要素的确定；纵断面设计内容包括纵面线形的绘制，平纵横的协调配合以及填挖平衡的控制；横断面设计内容包括路线横断面的绘制，填挖方量计算；路面结构设计内容包括沥青路面结构层设计，面层厚度的确定等；防护工程设计内容主要是挡土墙形式和尺寸设计。 关键词：高速公路； 平面线形； 纵断面线形； 横断面； 沥青混凝土路面 Construction Design for the 11th contract section of Xi’an to Shangzhou’s Freeway Abstrac:The terrain of the 11th contract section of Xi’an to Shangzhou’s Freeway is mountainous and hilly areas. Through the calculation of traffic statistics , as well as the amount of engineering ,geological conditions, road construction materials and many other considerations ,finally ,people determine the design speed of 80km / h, roadbed width of 24.5m, and use the asphalt concrete pavement design. The design includes the three-dimensional design (horizontal design, vertical design, cross-sectional design) , pavement design (asphalt concrete pavement), protection engineering design (retaining walls) and the drainage facilities design. The graphic design includes the determine of the selection of the highway route, the drawing of the horizontal alignment and the curve elements. The vertical design includes the drawing of the vertical alignment , flat vertical and horizontal coordination and balance of control excavation and filling; The cross-sectional design includes the line’s drawing ,and the calculating of excavation and filling.The pavement design includes the asphalt pavement design, the setting of surface layer thickness and so on. The protection engineering design is primarily aimed at retaining the form and the size design. Key words: freeway，orizontal alignment，ertical alignment，ross section，sphalt concrete pavement 目录 引　　言 1 第1章　总 说 明 2 1.1　任务要求 2 1.1.1 基本要求 2 1.1.2 设计过程 2 1.1.3 交通工程及交通设施 2 1.1.4 本设计所用指标 2 1.2 设计任务 4 1.2.1 平面设计部分 4 1.2.2 纵断面设计部分 4 1.2.3 横断面设计部分 5 1.2.4 路面结构设计部分 5 1.2.5 路基防护工程及排水设计部分 5 1.2.6 隧道设计部分 5 1.3 沿线工程地质条件及评价 6 1.3.1 地形、地貌及气候条件 6 1