托轮轴承组的设计.docVIP

托轮轴承组的设计 摘要 此次设计的任务是研究托轮轴承组的工作原理、性能和特点，采用理论联系实际的方法，研究影响托轮轴承组效率的影响因素，进行必要的结构改进，提出结构的方案并实施设计。同时，进行相关结构参数和工艺参数的设计与计算、总体方案设计，总体装配以及传动、机体等部件和相关零部件设计及绘图。主要设计方案如下： (1)对托轮轴承组的工作原理进行深入研究，根据托轮轴承组的工作能力和使用要求，设计出总体方案。 (2)设计出合理的拖轮轴承结构和零件的强度，保证运行的稳定性。 (3)设计出合理的驱动装置，保证运行的高效性。 托轮轴承是一个坚固的钢质鼓轮，通过轴承支撑在窑的基础上，中心贯穿一轴，两轴颈安装于两轴承之中，一般采用ZG55制造托轮，，硬度高于轮带硬度HB30～40，它是在不良环境下工作，负荷大，温度高，周围灰尘大，一般采用滑动轴承。 关键词：托轮轴承组，结构设计，稳定，应用 ABSTRACT The task is to study the design of bucket elevator NSE working principle, performance and features, using the method of integrating theory with practice, study the impact of bucket elevator efficiency factors, carry out the necessary structural improvements to the program structure and implementation of design. At the same time, the relevant structural parameters and process parameters of the design and calculation, the all over program design, the general assembly, as well as transmission, body parts and related parts and components such as design and graphics. Design options are as follows:  (1) bucket elevator to the working principle of an in-depth study, in accordance with TH250 bucket elevator capacity and use of the work requirements of the overall program design.  (2) design a reasonable hoist the strength of the structure and components to ensure stability.  (3) design a reasonable drive to ensure the efficient operation.  The bucket elevator with throughput, and enhance the high degree of high, stable and reliable, easy operation and maintenance, long life and other significant features. Bucket elevator for conveying powder, granular and small block of low-wear properties of cut, material packing density of less than 1.5t / m, material temperature does not exceed 250 ℃, is widely used to enhance cement machinery. KEY WORDS: Bucket elevator, Structural Design, Stability, Apply 目　录 托轮轴承组的设计 I 摘要 I 前　言 1 第1章本课题介绍及设计理论 2 1.1概述 2 1.2回转窑 2 1.2.1水泥窑的分类及特点 2 1.2.2回转窑概述 4 1.2.3 回转窑的结构 5 第二章托轮 17 2.1 托轮与窑体的窜动 17 2.1.1 托轮及其轴承的结构 17 2.1.2回转窑体的窜动 17 第三章水泥工艺 20