2009年广东考英语试题及答案(A卷).docVIP

摘要 计算机网络技术的飞速发展和信息高速公路的建设，互联网已逐渐渗入我们生活的各个方面，为了满足大容量和更商频率的信号传输要求，对信息或信号的传输媒介一一数据电缆的性能指标提出了越来越高的技术要求。如何生产出高性能的数据电缆，如何有效地提高和保证电缆的制精度和稳定性及均匀性，对生产设备也提出了更高的要求。 为了满足高速数据电缆的生产需要进行技术改造，使生产线达到数据电缆的工艺要求。本论文首先介绍了国内外线缆设备的一些状况。基于安装容易、节省成本、集中组态、少维护成本和投资风险等因素考虑，采用PROFIBUS-DP总线网络下的PLC控制系统来改造线缆的运动控制，对电机则全部采用直流驱动方式。然后讲述了接条生产线系统框架的搭和整个系统的配置和实现。由于张力的稳定性对电缆的很多性能指标的都会产生影响，所以放线系统的改造采取生产线速度前馈控制方式，同时通过对电缆张力、动滑轮位最两个信号的采集，再经过PID调节的闭环控制方式，来实现高速、恒张力的放线。此方法比传统控制的多了一路张力反馈控制，更易于保持张力的稳定。 该系统的设计和应用，对于电线电缆厂的旧生产线改造，特别是对生产数据电缆的高要求的恒张力控制系统的构建，具有一定的借鉴作用。 关键词：数据电缆，PID，张力控制，PROFIBUS，PLC ABSTRACT With the rapid of computer teachnology and IT highway road construction,Internet is going into our daily life.To meet with requirements of huge capacity and high transmitting medium of signals or information.To proformance cable and to guarantee the quality of cable ,a high-level product line is required. At present,our factory has an important jacketing line in the 90’s which needs to carry on the technological transformations ,so as to meet high speed simultaneously ,to achieve the technological requirement of data cable.The strict control of tension must be carried out.Based on its ease to install,economical consideration ,contralism configuration and reduced maintenance cost,profibus-under the DP main line network the plc control system is need.Adaped with the cable tensity,the movable pullet posion and line speed to three signals are superimposed.The PID processing close-loop control is passed through.The permanent tensity in high-speed line running is realized.With one more tensity feedback than the trational way,it’s easier to maintain the stability of the tension.80%.Enhangcement of electric perforance stability has a bigger promotion than before.We have not received one customer suit yet. After the transformation passed through three months line running,production speed enhanced about 80%.Enhangcement of electric perforance stability has a bigger promotion than before.We have not received one custom