11053中英文朗读29752.docVIP

7．通电检查电动机的转向是否正确。不正确时，在电源侧或电动机接线盒侧任意对调两根电源线即可。 7. Electricity check motor steering is correct. Is not correct, in the switch power supply side or motor terminal box side arbitrary two power cord. （二）试运行中的检查 (2) the commissioning of the inspection 5．滑动轴承温升不应超过45℃，滚动轴承温升不应超过60℃； 5. The sliding bearing temperature rise shall not exceed 45 ℃, the rolling bearing temperature rise shall not exceed 60 ℃; 电动机第一次启动一般在空载情况下进行，空载运行时间为2h，并记录电机空载电流。 Motor starting for the first time, generally under no-load condition, no-load running time is 2 h, and record the motor no-load current. 1H413024输配电线路的施工技术