汽车车架设计(中英翻译)教案分析.docVIP

毕 业 设 计 英 文 翻 译 汽车设计——车架设计 学 院： 汽车与交通学院 班 级： 学生姓名： 指导教师： 职 称： 2013 年 5月 30日 Automobile Design----Frame Designs The vehicle frame is the basic platform to which all suspension and steering linkage parts attach. A vehicle will neither steer nor handle well if the frame is too flexible. A rigid frame structure may pass unnecessary vibrations into the passenger compartment. The frame and suspension design will affect the ride quality, handling, and durability, as well as the levels of both noise and vibration. Manufacturers use several different types of construction on their vehicles. Of these, separate body and frame construction was the most common through the 1970s. It is still used in large vans, pickups, and trucks. In this type of construction, the engine, drive line, running gear, and body mount to the frame through insulators. Insulators are synthetic rubber pads that keep road and engine noise and vibration from going into the passenger compartment. A second type of construction is the unitized body. This, design is by far the most popular in modern vehicles. The unitized design has a lightweight structure with the required strength. Tn this type of construction, the frame is welded into the body as part of the body structure. Body panels add strength to the frame pieces. The running gear and drive line are mounted to the unitized body through large, soft synthetic rubber insulators. The insulators minimize the transfer of noise and vibration. If the insulators are too soft, they will allow too much running gear and drive line movement. This movement, called compliance, affects vehicle handling and control. If the insulators are too hard, they will not insulate noise and vibration as they should. The manufacturer carefully designs the insulators and puts them where they will be in a vehicle with low noise and vibration transmission that still has pro