110kV区域变电站电气部分设计1资料.docVIP

毕业设计（论文、作业） 毕业设计（论文、作业）题目： 110kV区域变电站电气部分设计 分校（站、点）： 国顺路校区 年级、专业： 09秋机械 教育层次： 本科 学生姓名： 陈磊 学 号： 0931001256285 指导教师： 李杰 完成日期： 2012年5月5日 中 文 摘 要 变电站作为电力系统中的重要组成部分，直接影响整个电力系统的安全与经济运行。本论文中待设计的变电站是一座降压变电站，在系统中起着汇聚和分配电能的作用，担负着向该地区工厂、农村供电的重要任务。该变电站的建成，不仅增强了当地电网的网络结构，而且为当地的工农业生产提供了足够的电能，从而达到使本地区电网安全、可靠、经济地运行的目的。 本论文《110kv变电站一次部分电气设计》，首先通过对原始资料的分析及根据变电站的总负荷选择主变压器方案。电气主接线设计短路电流计算电气设备选择Abstract Power system substation as an important part of the entire power system directly affects the safety and economic operation. To be designed in this paper is a step-down substation substation in the system plays the role of aggregation and distribution of electric energy, charged with the factory to the region, the important task of rural electrification. The completion of the substation will not only strengthen the local power grid network structure, but also for the local industrial and agricultural production provides enough power, so that the regional power grid so as to achieve safe, reliable and economic operation purposes. The paper 110kv substation once part of the electrical design, the first original data through the analysis and selection based on total load of the substation main transformer, the main wiring under both economical and reliable, flexible operation requirements, select the main connection of two programs to be selected A technical comparison, out of poor program to determine the main electrical substation connection program. Second, the short-circuit current calculation, obtained from the three-phase short circuit calculation occurs when short-circuit the voltage level of the bus, its steady-state c