Eco-solutionworkshopPowerHouseCrane_V3_1027.ppt

2008-11-25 Siemens Crane COC 自我介绍 主要内容 桥式起重机简介 桥式起重机的典型配置方案 桥式起重机常用的功能—S120和G120功能介绍 BOP面板的使用 PROFIBUS通信 向导式的配置 智能电源模块并联 多种速度给定方式 防溜钩设计—抱闸控制 电机切换 主从控制 抓斗电流均衡控制 双机抬吊控制 成功案例 主要内容 桥式起重机简介 桥式起重机的典型配置方案 桥式起重机常用的功能—S120和G120功能介绍 BOP面板的使用 PROFIBUS通信 向导式的配置 智能电源模块并联 多种速度给定方式 防溜钩设计—抱闸控制 电机切换 主从控制 抓斗电流均衡控制 双机抬吊控制 成功案例 Overhead Bridge cranes桥式起重机 1. General Overview 概述 : Cranes in power houses for the installation and repair of the machines. Power house cranes are primarily used in power plants, both conventional and nuclear. They are required for the installation and repair of turbines and generators. 桥式起重机用于建设初期的安装和运行期间的维修吊装设备. Overhead Bridge cranes桥式起重机 The cranes are primarily bridge cranes, i.e. they run on elevated tracks under the roof of power houses and factory buildings. In addition to the main hoisting gear, normally a very slowly running driving unit, the crane also has an auxiliary hoisting gear, a trolley and a crane traveling gear. 机械结构为单梁或双梁桥式, 运行在机房或车间屋顶下方的高架轨道上.主要有运行速度缓慢的主起升机构和副起升机构, 还有小车和大车机构. Overhead Bridge cranes桥式起重机 The driving units of a power house crane are 驱动单元有: Main hoisting gear consisting of 1 motor and 1 drive unit 主起升机构包含1(2)个电机和1个齿轮箱 Auxiliary hoisting gear consisting of 1 motor and 1 drive unit 副起升机构包含1个电机和1个齿轮箱 Trolley consisting of 2 motor and 1 drive unit 小车机构包含1个电机和1个齿轮箱 Crane travelling gear consisting of 4 motor and 1 drive unit 大车行走机构包含2(4)个电机和1(2)个齿轮箱 Overhead Bridge cranes桥式起重机 Basic functions基本功能: The power is supplied from a low-voltage power supply, normally with a cable tender, or a sliding contact to the crane. 设备电源通常经过拖令电缆或滑触线由低压电网供电. Nowadays, hoist drives, trolley drives and drive systems are principally variable-speed three-phase current drives. Pole-switchable motors are still used for small, simple overhead bridge cranes. The variable-speed drives consist of AC converters/inverters or slipring rotor motor