测试用例的设计技术方案.pptVIP

* 案例研究3：压力/负载测试用例设计（续1） 编号 CS CU DS PM VM UN BW DN 应该产生的行为 结果 说明 01 PIII 800 10% 50MB 64MB 50% 30 1M 5M 正常 02 PIV1800 80% 100MB 128MB 30% 100 0.5M 10M 无法响应 03 PII 500 25% 600MB 256MB 15% 10 2.5M 20M 正常 04 PIV2800 35% 400MB 512MB 80% 500 0.5M 50M 无法响应 05 PIV3200 50% 200MB 1024MB 65% 2000 1.5M 100M 无法响应 * 案例研究4：测试软件对话框的界面设计 Deployment Testcase Test Case ID：62 Title： UserExitForm Path： \Deployment\General Author： xxxxx Purpose : make sure the dialog to test is properly designed, look for truncations, wrong tab orders, duplicated hotkeys, overlappings and any other posible issues Steps： Pre-steps: 1. Launch App. 2. Go to “Tools” / “Import/Export Settings…” 3. Select “General development settings” 4. Click Reset Settings 5. If you are prompted to save your settings, click “Don’t save” 6. A dialog appears telling you that the operation had been successful * 案例研究5：测试中断安装软件的功能 Purpose: Verify the app can be canceled during installation Test Steps: 1. Launch [App Name] 2. From the drop down menu select File, New and Project 3. The New project Dialog box should appear 4. In “Project Types”, select “Other Project Types” and under this, “Setup and deployment”. From the “Templates” select a setup project, give the project a name for example Deploy1 and press “OK” 5. From the “Build” menu click “Build Solution” and wait until the project has been built 6. Close the project and navigate to the folder where you saved your project 7. Double click the Setup folder and then double click the Debug folder 8. Click the Setup.exe to launch the Windows Installer 9. At the first stage of the wizard click the “Cancel” button and click “Yes” when asked are you sure you want to exit 10. The Installation Interrupted dialog appears * 案例研究6：测试软件中文大字符集的支持 Create and structure a site with GB 18030 character [App name] is a very complex product, and its ability of site management as well as multimedia authoring is quite powerful. The following testcases is used to test the performance in