空压机吸气阀盖头加工工艺编程及夹具设计资料.docVIP

摘要 本文通过分析支架零件、空压机吸气阀盖头以及支承受套的结构特点和加工要求，制定了一套较合理的夹具设计，从而保证该零件的加工精度。通过对各种定位夹紧装置的分析比较，选择并设计了一套既能够满足加工要求的夹紧装置，并对各工步进行数控编程。根据六点定位原理对产品进行恰当的定位。 关键词：工艺流程；工艺装备；夹具设计 ABSTRACT This article through the analysis support components, the air compressor snifting valve lid as well as the supporting the unique feature and the processing request which wraps, has formulated a set of reasonable jig design, thus for guaranteed the machining accuracy of parts. Through to each kind of localization clamp analysis comparison, chose and combines a set both to be able to satisfy the processing request, and the quite suc