眼震电图2摘要.docVIP

第一页：report template????报告模板 this screen allows you to customize the laboratory information that gets printed on the patient reports?you can modify the general appear of the report and decide which tests are included which tests included in the default report template.（这个屏幕允许您定制的实验室信息印在病人报告您可以修改报告的一般出现并决定哪些测试包含哪些测试包含在默认的报告模板。Test display template?测试显示模板?This grid shows the default report settings form the currently selected protocol from the test tad.to change the viewed protocol, click the protocol button on the test tad then return to the report tad to see the new protocol’s list.这个网格显示默认的报告设置形式从测试出当前选择的协议。修改协议,点击按钮的协议测试有点然后返回报告看到新协议的名单。Report display?报告显示? There are two options when printing out the display of the test;close-up and full test.selecting close-up will print an abbreviated view of each section tested .saccade tests have the first 15 seconds plotted,pursuit tests have the selected cycle plotted,and other tests have the selected 10 seconds plotted .full test will print the full length of each section with up to two channels displayed.in full test mode,vertical channels are plotted at half the height horizontal channels.有两种选择,当打印的显示测试;特写和完整的测试。选择近距离将打印一个缩写的每个部分测试。扫视测试第一个15秒策划,追求测试所选周期策划、和其他测试所选10秒了。完整的测试将打印的全部长度显示每个部分有两个渠道。在完整的测试模式下,垂直通道是绘制在一半的高度水平通道。第二页：Print secondary channel打印二次通道If a secondary channel (i.e.vertical channel for tests performed in the horizontal plane,horizontal channel for tests performed in the vertical plane)was of importance for the test,then enable this option.if more than 2 channels were recorded,then the last channel configuration shown on the analysis screen will be used.如果第二个通道(即。水平面垂直通道测试执行,执行水平通道测试的重要性在垂直平面上)测试,然后启用该选项。如果超过2通道都被记录下来,那么最后一个通道的配置将使用显示屏幕上的分析。 Print grid?打印网格 If you wish to view a stripchart-style printout of the eye data,the grid will be printed if this feature is checked .the grid legend is found on the upper-right corner of the printed page with this feature checked.如果你想查看stripchart-style眼睛的打印输出数据,网格将打印如果这个特