汽车后轮驻车制动器的特点与维修 毕业论文外文翻译.docVIP

附录 Car rear parking brake is well known characteristics and maintenance parking brake, the car must have one of the braking device. Iveco second-generation products in vehicle brakes, parking brake is a mechanical control mechanism and the rear drum brake combination. Such a structure, so that not only after the brake drum brake and parking brake also played a role. With the use of rear disc brake, Turin-V vehicle parking brake with the rear brakes will be fixed in the form and change. If the rear wheels with drum brakes, while maintaining the basic structure of the original second-generation products; the use of a disc brake, rear wheel will have to configure a dedicated parking brake. On the disc brake is concerned, there is the structure with the parking brake disc brake, the parking braking force acts on the brake discs on both sides of the work surface, such a brake complex structure, relatively somewhat less reliable. Turin-V cars equipped with dual-piston sliding front disc brakes have specifically set up after the parking brake. The role of the parking brake force to the brake drum inner disk on the work surface, so that the brake disc has two separate friction surface, life can be improved, brake caliper is also simplified the structure. Turin-V car rear parking brake device manipulated by a mechanical parking brake and special climate of two parts (brake disc for the traffic, shared parking brake parts.) 1, mechanical control mechanism to maintain the basic structure of the original second-generation products, mainly composed of pieces with a handle, the first wire cable, ratchet plate, adjust the threaded sleeve, locking nut, after the wire cable and the guide disc and so on. 2, the special structure and principle of the parking brake disc brake after the match with a special parking brake, parking brake after the special bottom bracket through eight holes, and the rear axle relative to the fixed axle shaft flange bolts. Before and after the friction sh