基于单片机控制空气能热水器系统设计本科生毕业设计（论文）说明书.docVIP

编号： 毕业设计说明书 题 目 基于单片机控制空气 能热水器系统设计 学院 专 业： 电子信息工程 学生姓名： 陈圣盟 学 号： 0901120425 指导教师： 胡机秀 职 称： 工程师 题目类型： 理论研究 实验研究 工程设计 工程技术研究 软件开发 2013年6月5日摘 要 本设计基于单片机控制空气能热水器系统设计，其研究的意义是空气能热水器通过介质交换热量进行加热,不需要电加热元件与水接触,所以没有漏电的危险,它也消除了中毒和爆炸的隐患,更不会因为排放废气造成空气污染Abstract This design based on single chip microcomputer control air sources water heater system design. Air source water heater is the significance of the research through the exchange of heat for heating medium.dont need electric heating element contact with water. So there is no risk of leakage also. It also eliminates the hidden trouble. Poisoning and explosion will not air pollution caused by the discharge of waste gas. Save energy improve the comprehensive utilization of energy to provide a secure, energy saving, environmental protection, cheap and reliable of a new generation of water heaters - air sources water heater. System mainly adopts the AT89S52 single chip microcomputer as control core air sources hot water system design. Control part mainly based on microcontroller STC89C52 as the control core. The hardware of data acquisition part by DS18B20 single bus no 3 sensor of water temperature.Discharge temperature of compressor.Machine heat transfertemperatur acquisition.The human-computer interaction part and the test results sent via RS232 interface to computer for display. Software part of the application Microcontroller C language realize the control function of the design This design features water level is lower than the minimum water level when the pump starts to work. The heat preservation water tank and water, filled with water.If the temperature of the hot water is below the set temperature of the lower limit. Compressor circulating water pump, fan starts to work outside the machine.Simulation absorb heat from the air.In the heat preservation water tank, the lim