异形坯连铸结晶器流场的水模型的研究.docVIP

异形坯连铸结晶器流场的水模型研究 沈昶　周俐　李建中 摘　要：通过1:2异型坯水模型实验,研究了马钢760mm×460mm×120mm异型坯结晶器在不同水口结构、不同工艺参数条件下的流场。结果表明在其他条件下相同时夹角120°水口较100°水口的流场较为合理,工作拉速下应采用正面开孔倾角为9°,侧孔倾角15°水口结构。关键词：水模型　异型坯结晶器　流场 Research on Water Model of Flowing Distributionin Profiled Blank Continuous Casting Machine Mould Shen Chang　Zhou Li(East Chia Metallurgy College)Li Jianzhong(Ma Anshan Iron Steel Co.Ltd.) Abstract：Through the experiments with water model of 1:2 ratio,different flowing distribution resulted from different nozzle structures and technological parameters in 760mm×460mm×120mm profiled blank mould in Ma Anshan Iron S