红外焦平面条带状非均匀性校正硬件实现方法.pdfVIP

第44卷第10期 红外与激光工程 2015年10月 Vol.44No.10 InfraredandLaserEngineering Oct.2015 红外焦平面条带状非均匀性校正硬件实现方法 张 磊袁王岳环袁宋 琼 (华中科技大学 自动化学院袁湖北 武汉430074) 摘 要院红外焦平面阵列条带状非均匀性严重影响了其成像质量袁大大限制了它的应用遥实现了一种 基于FPGA的红外焦平面阵列条带状非均匀性实时校正系统袁该系统以中值红外均衡算法为核心袁针 对算法以及FPGA 的特性进行了优化袁单帧内可进行条带状非均匀性的校正袁硬件仿真结果表明院处 理效果显著遥 系统处理速度快尧资源占用量小袁可以作为一个独立模块嵌入到红外焦平面成像与处理 系统中袁实现条带状非均匀性的实时校正,有很高的实用性与可扩展性遥 关键词院实时非均匀性校正曰 红外焦平面阵列曰 条带状非均匀性曰 FPGA 中图分类号院TN215 文献标志码院A 文章编号院1007-2276(2015)10-2886-05 Hardwareimplementation ofstripenon-uniformity correction methodforinfraredfocal planearrays Zhang Lei, Wang Yuehuan, Song Qiong (School of Automation袁Huazhong University of Science and Technology袁Wuhan 430074袁China) Abstract: The stripe non-uniformity of infrared focal plane array strongly impact the image quality, thus the application of infrared focal plane array is strongly restricted. A real-time FPGA-based system for correcting the stripe non-uniformity was proposed. The system was based on Midway Infrared Equalization method and it could execute the correction in a single frame. Simulation results have demonstrated its efficiency and effectiveness in correcting the stripe non-uniformity. System architecture was optimized for the algorithm so that the system had relatively low FPGA resources consumption and high speed. The system can be embedded into the infrared focal plane array imaging and processing system as an independent module to realize a real-time stripe non-uniformity correction. Due to the previous features, the system has great functionality and extensibility and has a broad prospect in practical application. Keywords:real-time non-uni