2JTP-1.6×0.920型提升机制动系统的设计及分析 毕业设计(论文).doc

摘要 用电信号实现对流量、压力和流向的控制，可进行远距离控制，构成自动控制系统，既可开环控制，也可闭环控制控制原理简单、控制精度高、抗污染能力强、价格适中，受到人们普遍重视，使得该技术得到飞速发展提供平稳均匀的摩擦制动力及零部件互换性好与电控和液压系统配合，使大型机电设备保平稳地减速停车关键词：Abstract This design focuses on 2JTP-1.6x0.9/20 design and analysis of hoist braking system as the primary, introduced the hoist hydraulic braking system of the status, role, principle of working principle and structure of certain components, according to the available parameters to develop design solutions. For the old hoist braking the appropriate comparison is done using electro-hydraulic valve and proportional valve control to make the analysis. Because of hoist braking system, very strict security requirements, maintenance, and braking system fails, will have serious consequences, so the design for hoist braking systems matching protectors with good performance. As science and technology of development, upgrade mechanism dynamic system also has has larger of changes, by block gate brake evolution into gate disc brake, from past by using of electric liquid valve brake change for modern technology by used of proportion valve brake, used proportion valve control brake has many benefits, and proportion zoom Manager tie, with signals implementation on flow, and pressure and flows of control, can for far distance control, constitute automatic control system, both can open ring control, also can closed ring control. Control principle of its simple, high control precision, strong anti-pollution capacity, affordable, receive widespread attention, making the technologies have developed rapidly. This design is the selection of TP series brake disc brake, it will provide a smooth friction force of the uniform and the good parts interchangeability, and electrical and hydraulic control systems, can make large electromechanical equipment maintain smooth deceleration parking, this widely application of brake in mine. KeyWords: hydraulic brake; electro-hydraulic valve proportional valve; disc brakes。目　　录 摘 要 I Abstract II 1 绪论 1