基于multisim的有源滤波电路的设计本科毕业论文.docVIP

基于Multisim的有源滤波电路的设计 摘要：滤波器是一种能够滤除不需要频率的分量、保留有用频率分量的电路。工程上常用于信号处理、数据传输和抑制干扰等方面。利用运算放大器和无源器件（R、L、C）构成有源滤波器具有一定的电压放大和输出缓冲作用。按滤除频率分量的范围来分，有源滤波器可分为低通滤波器、高通滤波器、带通滤波器和带阻滤波器。本文介绍了有源滤波器的具体功能及特点，并利用Multisim7软件完成有源滤波电路的设计。 关键词：有源滤波器 Multisim7 幅频响应 毕业设计(论文)外文摘要 Active filter circuit based on Multisim Abstract: Filter is to filter out frequency components do not need and to retain a useful frequency components of the circuit. Projects commonly used in signal processing, data transmission and suppressing interference and so on. The active filter constituted by using operational amplifiers and pass