基于蓝牙的无线输液报警系统_本科生毕业设计论文.docVIP

本科毕业设计（论文） 论文题目：基于蓝牙的无线输液报警系统 摘 要 静脉输液是现在医院中常用的输液方式，大部分的输液要靠医护人员不定时巡检，使得在就医高峰期，医护人员很难应付，常常会造成无法及时停止输液整个输液报警系统，可以很好地解决输液管理问题，减轻医护人员的工作压力，缓解医护人员不足的矛盾。 关键词：光电检测，蓝牙，无线传输，输液报警ABSTRACTIntravenous infusion is the commonly used transfusion method in hospital now ,but most of the infusions depend on the inspection of paramedics from time to time, what makes paramedics difficultly to cope with when in the medical treatment peak，and it often leads to the not timely discontinuation of the infusion that harm the patients’ health and even endanger their life. The present paper is to design an infusion alarm system of one leader with multi-followers , which uses photo-electricity to detect liquid level change in the infusion tube, to determine the infusion is complete or not through discriminating the liquid surface changes of electrical signal. The timely alarm prompt of transfusion completion transfers the alarm signal to the alarm terminal via the Bluetooth wireless by using the SCM, to achieve the dual alarm which from the machine-infusion test terminal and the host machine-alarm terminal. The use of master-slave machine’s Bluetooth can make the whole infusion alarm system to achieve the centralized management which from one host machine-alarm terminal to many slave machines-infusion test terminal over the same time .Bluetooth wireless transmission can make the slave machine-infusion test side to move arbitrarily within the range that host Bluetooth effective signal coverage, so it can solve infusion management problems very well, reduce paramedics’ pressure and ease the lack of paramedic. Key Words: Photodetector, Bluetooth, wireless transmission, Transfusion alarm目 录 摘 要 I ABSTRACT II 第一章 绪论 1 1.1 研究的意义 1 1.2 国内外的研究状况 1 1.3 主要研究内容 1 1.4 主要设计思路 1 第二章 系统硬件电路设计 2 2.1 系统总体框图 2 2.1.1 从机-输液检测端 2 2.1.2 主机-报警终端 2 2.2 单元电路设计 3 2.2.1 电源电路 3 2.2.2 液面光电检测 3 2.2.3 报警信号甄别 5 2.3 蓝牙系统 5 2.3.1 蓝牙模块外围电路 6 2.3.2 蓝牙从机控制电路 7 2.3.3 蓝牙主机控制电路 7 第三章 系统软件设计 8 3.1 输液检测端软件系统 8 3.2 报警终端软件系统 10 第