设计年处理量为1050万吨的××选矿厂 毕业设计论文.doc

设计年处理量为1050万吨的××选矿厂 摘要 本设计为本科生毕业设计，是针对鞍山式铁矿石的初步设计，设计年处理量为1050万吨的××选矿厂，设计阶段为初步设计。设计以齐大山选矿厂的矿石特性、选矿试验研究结果、可行性研究报告及处理同类矿石选矿厂生产实践等为依据。设计主要内容包括说明书和图纸两大部分。说明书部分主要包括工艺流程的确定与计算，主要设备的选择等。设计的生产工艺为三段一闭路破碎，阶段磨矿、粗细分级、重选-磁选-阴离子反浮选流程。说明书对所设计工艺流程进行了合理性论证，在设备选择方面，对主要设备破碎机、球磨机进行了详细的方案对比，对辅助设备作了初步的选择。本设计的技术经济指标为：原矿品位29.22%，精矿品位67.28%，尾矿品位10.74%，金属回收率7.26%。所选用设备的工艺技术上先进，经济上合理，生产上可靠，具有较高的技术经济指标。图纸部分主要绘制了中细碎车间、主厂房、选别车间的平断面和设备形象联系图及数质量矿浆流程图。 关键词：鞍山式铁矿；阶段磨选；粗细分级；重选-磁选-阴离子反浮选工艺 Abstract The design for the Graduation Project is the type of Anshan iron ore for the preliminary design, design capacity to handle 10.5 million tons in the 鬃 oconcentrator, designed for the preliminary design stage. Design Qidashan Concentrator ore characteristics, processing test results, the feasibility study report and deal with the same production practices such as ore dressing plant based. Some instructions include the identification and calculation process, major equipment selection. Design production process for the three sections of a closed-circuit crushing, grinding stage, thickness grading, re-election - magnetic separation - anion reverse flotation process. Manual pair designed a reasonable process for Demonstration, in equipment selection, major equipment, crusher, ball mill Comparing the plans in detail, of auxiliary equipment, made an initial choice. Ore grade of 29.22%, concentrate grade of 67.28%, 10.74% tailings grade, metal recovery of 75.26%. The selected equipment is technically advanced and economically rational, the production of reliable, high technical and economic indicators. Drawing in some of the main draw of the crushing plant, main plant, the sorting plant and equipment level image section link map and flow chart of the number of quality pulp. Key word:Anshan Iron deposit; stages of grinding and separation; Gravity separation-high intensity magnetic separation-anionic reverse flotation technology 1 总论 1 1.1毕业设计的选题背景，设计依据 1 1.2厂区自然概况 1 1.2.1隶属关系 1 1.2.2采矿方法概述、主要采矿设备 1 1.2.3地理位置及交通概况 2