ZEMAX_中如何进行公差分析.doc

ZEMAX_中如何进行公差分析　　Introduction　　ZEMAX offers a built-in tolerancing feature which you may use to perform a complete and accurate tolerance analysis of your optical system.　　Although ZEMAX performs the calculation of each tolerance “behind the scenes,” ZEMAX alsogives you the option to view what it is doing more closely; the operation of the tolerancefeature is not always transparent.　　There are two different methods to saving the modifications that ZEMAX made to your lens file to calculate the change in criteria as a function of the specified tolerance(s).　　The first option may be defined in the Tolerance Data Editor as a tolerance control operand.　　The SAVE tolerance control operand can be used after any tolerance you would like to inspect in more detail. For example, suppose that you had a tolerance operand TEDX (tolerance onelement decenter in X) in the Tolerance Data Editor. After reviewing the resulting sensitivity analysis, the results did not appear to make sense. 　　As a result, you may edit the Tolerance Data Editor by adding a SAVE command after the TEDX　　operand. The next time the tolerance analysis is run, ZEMAX will save the file used to compute　the TEDX tolerance, which you may view as a ZEMAX lens file.