A级生物安全实验室建设概述资料精要.ppt

* Similar to Biosafety Level 1 and is suitable for work involving agents of moderate potential hazard to personnel and the environment. It differs from BSL-1 in that (1) laboratory personnel have specific training in handling pathogenic agents and are directed by competent scientists; (2) access to the laboratory is limited when work is being conducted; (3) extreme precautions are taken with contaminated sharp items; and (4) certain procedures in which infectious aerosols or splashes may be created are conducted in biological safety cabinets or other physical containment equipment. * Applicable to clinical, diagnostic, teaching, research, or production facilities in which work is done with indigenous or exotic agents which may cause serious or potentially lethal disease as a result of exposure by the inhalation route. Laboratory personnel have specific training in handling pathogenic and potentially lethal agents, and are supervised by competent scientists who are experienced in working with these agents. All procedures involving the manipulation of infectious materials are conducted within biological safety cabinets or other physical containment devices, or by personnel wearing appropriate personal protective clothing and equipment. The laboratory has special engineering and design features. * The Biosafety Level 4 facility itself is generally a separate building or completely isolated zone with complex, specialized ventilation requirements and waste management systems to prevent release of viable agents to the environment. The laboratory workers complete isolation from aerosolized infectious materials is accomplished primarily by working in a Class III BSC or in a full-body, air-supplied positive-pressure personnel suit. * * * * 一级屏障：个人防护装备、生物安全柜、高压灭菌器、离 心机罩、洗眼器二级屏障：独立的送、排风系统、中央空调、按“三区二缓” 进行分区 六、 样本的转送和发放 样品从一个实验室转送到另外一个实验室，必须是血清或血浆，除特殊需要外，一般不能用全血。 且需置于带有盖帽的试管内，防止样品流出，试管上应有明显的标记。清楚地标记为感染性材料