办公楼设计教程详解.docVIP

毕 业 论 文 （设 计） 题 目 英文题目 The design of a frame structure office building院 系 土木工程与城市建设学院 专 业 土 木 工 程 姓 名 年 级 2010级 土A1012班 指导教师 二零一年五月本毕业设计题目是，面积大约是。本建筑采用钢筋混凝土现浇框架结构体系基础采用。设计内容包括。部分接着计算竖向荷载（恒载及活荷载）作用下的结构内力是找出最不利的一组或几组内力组合。选取最安全的结果计算配筋并绘图。 框架结构，Abstract The graduation design topic is YingTan ZongLi originality company office building design, the engineering design of the office is frame structure, 5layer 3 cross, the area is about 4235m2. This building adopts reinforced concrete whole cast-in-situ frame structure. Using natural foundation based on independent foundation. The design contents include drawings and text two parts. Text part includes construction, structure design, structure calculation, foreign language translation.Among them the structure calculation is given priority to, first structure layout, selecting a unit to calculate its constant load and live load and wind load; Then calculate the internal force when framework under the vertical load and wind load, make the figure of internal force, shear force and shaft tries;Finally combination the internal force of beam-column respectively under the variable load effect’s and permanent load effect’s control. Then design the beam-column’s section. Also calculating the reinforcement of the stairs and foundation. Drawing part includes building figure design and structure design. Architectural figure is based on engineering requirement and the office building design criteria and so on to design. [Key word]: Frame structure，Internal force calculation，The combination of internal，Reinforcing bars 选题报告 II 摘 要 III Abstract IV 第1章 建筑设计说明 3 1.1设计题目 3 1.2工程概括及特点 3 1.3建筑平面设计 3 1.2.1使用部分的平面设计 3 1.2.2交通组织及防火疏散设计 3 1.2.3平面图的表达及尺寸的标注 4 1.4建筑立面设计 4 1.3.1立面设计步骤和方法 4 1.3.2立面的表达及尺寸标注 4 1.5剖面设计 5 1.4.1房间各部分高度 5 1.4.2剖面图表达和尺寸标注 5 第2章 结构设计说明 7 2.1建筑构造设计 7 2.2主要建筑材料的选择 7 2.3楼（屋）盖结构方案 7 2.4基础方案 7 第3章 结构计算 8 3.1设计资