单片机电阻炉温度控制系统精要.docVIP

摘　　要 本文介绍了一个以8031单片机为核心的温度控制系统。即用一台8031单片机及其它外围部件组成电阻炉温度自动控制系统对电阻进行DDC控制，并使系统达到工艺要求的各项性能指标。 为了提高温度控制的精度，介绍了一种利用8031单片机实现的电加热炉温度控制装置的组成及主要功能，对系统控制方法、硬件设计及其软件等都作了详尽的讨论. 本设计以8031单片机为核心组成的电加热炉计算机控制系统，其硬件电路包括检测装置、采样输入装置、控制信号输出装置、执行装置、报警控制装置、温度显示、键盘输入七部分构成。考虑到电加热炉是一个非线性，时变和分布参数系统，所以本文采用PID控制算法。 整个软件部分包括主程序和一些子程序构成，包括运行子程序、采样滤波子程序、温度显示子程序、恒温控制子程序、PID运算子程序、中断服务子程序等。由于整个系统软件相当庞大，为了便于编写、调试、修改和增删，系统程序的编制采用了模块化的结构，即整个控制软件由许多独立的小模块组成，以便于阅读。  8031 single chip computers Temperature control system of electric heating furnace Abstract This text regard electricity heating furnace as target of accusing of , is it confirm electric heating furnace composition of system and control the scheme to come through an analysis of targets characteristic of heating furnace of electricity. In order to improve the precision of temperature control , have introduced the composition of a kind of electric heating furnace temperature control device made use of one-chip computer to realize and main function, control to system method , hardware design and software ,etc. make exhaustive discussion. Originally design and regard 8031 one-chip computers as the electric heating furnace computer control system that the core makes up , its hardware circuit including keyboard shows, become temperature it give, it amplify , not straining wave , silicon controlled rectifier touching off after total mark after signal to,　It consider it is electric heating furnace it is each the non-linear ,when become and distributed by parameter systemmed, so a literary grace PID controls algorithms 。 　 The part of the whole software includes two parts of the hypervisor and control procedure, Include the movement sub- procedure and adopt the kind a sub- procedure, temperature manifestation sub- procedure, constant temperature control sub- procedure, PID carries to calculate the sub- procedure and break off the service sub- procedure etc. execution that report to the police and cuts off the service to operate etc. Control proc