毕业设计论文模板-出租车智能计价器的设计与实现.docVIP

学号1412203010 毕业设计(论文) 题目: 出租车智能计价器的设计与实现 作 者 张 届 别 201 届 院 别 信息与通信工程学院 专 业 电子信息工程指导教师 程望斌 职 称 完成时间 201年05月 1日 摘 要 随着城市出租车成为交通中为此需对出租车计价器进行优化设计。文中DS1302实时时钟系统AEE4霍耳传感测距系统AT24C02掉电存储系统数码管显示系统采用最后采用EDA工具软件PROTUES 7.8进行系统仿真，并对进行了调试文中设计的系统通过8位LED数码管可实现基本的计价功能，并能根据白天、夜晚、中途等待来调节单价，因此具有的应用价值。关键词：出租车计价器；；霍耳传感；AT24C02存储Abstract（另起一页） （一级标题：居中，小3号“新罗马字体”，段前、段后空一行，行间距20磅） With（段前空2格，小4号“新罗马字体”，固定值20磅行距） the improvement of city modernization,taxi become a beautiful landscape in urban transportation. Meanwhile,people put forward high demands of clear and reasonable taximeter.There is the phenomenon of unclear and unreasonable pricing method in taxi industry,which causes unnecessary trouble.Therefore the optimization design on taximeter is necessariy conducted.The design scheme of intelligent taximeter is rationally analyzed and scientifically expounded in this paper,signal acquisition and pricing system is designed based on AT89C51.And hardware systems and modules are designed, which is consisted of single-chip microcomputer system DS1302 real-time clock system,AEE4 Hall sensor measuring system,key system,AT24C02 power-down storage system and?digital tube display.At the same time, KEIL C51 is adopted to design software system,the main function module is analyzed and described.Finally the EDA software tool PROTUES 7.8?is used to system simulation,?and simple physical model is made and debugged. The experiment was carried out on the physical model, the effect is good.The relevant?data can be?stored in real-time and be displayed in split screen by 8 LED digital tube ,which can realize the basic valuation function and also can adjust the unit price according day, night, halfway waiting.So it has good application value and social