选择抽芯铆钉的要素.doc

选择的因素 This illustration provides a graphic representation of the POP blind rivet selection factors described below.此图提供了以下描述的抽芯铆钉的选择因素的图形表示。 Rivet Terminology/Nomenclature铆钉术语 1. Hole Size 1，开孔尺寸 Hole size can be important in blind riveting.孔的大小铆接重要。 Too small a hole will, of course, make rivet insertion difficult.过小的孔，当然会，使铆钉插入困难。 Too large a hole will reduce the shear and tensile strengths.过大的孔会降低剪切和拉伸强度。 It may also cause bulging or separation of the members by allowing the rivet to expand between them instead of only on the blind side.它也可能导致(Best practice is to follow the hole size recommendations provided). （最佳做法是按照所提供的孔大小的建议）。 Avoid burrs in and around the holes.避免毛刺和周围的孔。 2. Grip Range 2，铆接范围 The recommended thickness range over which the body length will consistently provide a proper setting in a hole of the specified diameter.推荐的厚度范围该身长度将指定直径的孔适当的设置。 3. Shear 3。剪 The load applied to a fastener along the joint interface.负载施加到沿接合界面的紧固件。 4. Tensile 4，拉伸 The load applied to a fastener along its length.负载施加到沿其长度的紧固件。 5. Joint strength 5，接头强度 First determine the single-joint tensile and shear values required for the application.首先确定所需的应用程序的单个关节的拉伸和剪切值。 These are functions of total joint strength, fastener spacing, rivet body material, and rivet diameter.这些都是的力量，紧固件间距，铆体材料和铆钉直径的功能。 Then refer to the Shear and Tensile in the Rivet Selection Guide on the product, and select a POP brand rivet that provides the values required.然后参考“剪切”和“拉力”的铆钉选型指南在产品上的，然后选择一个铆钉，提供所需的值。 POP brand rivets are not certified for structural aerospace applications and such use is not recommended. 6. Joint thickness 6。联合厚度 Measure the total thickness of the materials to be joined.测量的材料的总厚度被接合。 This determines the required grip of the rivet you select.这将决定您选择的铆钉所需的“抓地力”。 You must select a rivet with a grip range that includes the work thickness required.你必须选择一握范围，包括所需的工作厚度铆钉。 7. Nature of material7。 Both the rivet and the materials to be fastened will affect the ul