- 6
- 0
- 约4.72千字
- 约 3页
- 2017-06-07 发布于重庆
- 举报
有机硅锌粉底漆简述
Intended Uses
用途 一种灰色漆,用于温度150℃ -500℃(如发动机、锅炉、废弃管道等做底漆)
A Grey coating to protection at temperature between 150℃ and 500℃, It is suited for motor, boiler and exhaust gas pipeline etc, as primer. Product
Information产品简介 Two packages, Silicone zinc dust paint 双罐装,锌粉有机硅树脂漆 Application details
产品数据 Volume Solids 固体份 ≥62.5% Dry Flm Thickness干膜厚度 30-40microns 30-40微米 Theoretical Coverage 理论涂布率 7.37-9.08m2 /Kg 7.37-9.08平方米/公斤 Practical Coverage 实际涂布率 Allow appropriate loss 允许适量损耗 Storage and Handling
施工详述
Mix Radio 混合比 A : B=100:0.3(by weight) 甲:乙=100:0.3(重量比)
Method of Application 施工方法
Airless Spray 无空气喷涂 Recommended 推荐采用
Brush or Roller 涂刷或辊涂 Recommended 推荐采用
Conwentional Spray 传统喷涂 Not Recommended 不推荐采用
Thinner 稀释剂 C002 Cleaner 油漆设备清洗剂 C002 Pot Life 使用期 Not limit 不限制 Storage 贮存期 Six months 六个月 Drying time
干燥时间
Substrate
Temperature
底材温度 Touch Dry
表干
(h) Hard Dry
硬干
(h) Over coating Interval
覆涂间隔 Mix最短 Max最长 5℃
23℃
35℃ 18
6
5 72
24
24 24 hours 小时
24 hours 小时
24 hours小时 14days (天)
Storageand
Handling
贮存与管理 Storage 贮存 Store in cool and dry conditions 贮存于阴凉干燥处 Pack size 包装规格 A;30Kg in 20 liter container 甲:30公斤装于20公升容器中
B:90g in a litter bottle 乙:90克装于一小瓶中 Flash Point 闪点 35℃ Specific Gravity 比重 Approx 2.12Kg/L 大约2.12公斤/公升
Specification and
Surface preparation
技术要求及表面处理 Substrate should be blasted or rust-removed manually to near white
Clean the surface with cleaner There is no dirt (such as greasy dirt, grease and salts etc) on the surface,
The surface to be applied must be clean and dry
底材喷砂处理或手工除锈近乎出白
用清洁剂清理表面,无污物(如油污、
原创力文档

文档评论(0)