Catia中文教程-第3章-钣金设计要点.pptVIP

江达公司 参数设置 厚度、半径的定义 选择 Bend Relief 类型 Walls Wall概念 Profile Walls Profile Walls (具有裁剪部分) 用边缘生成Wall 续 Height 或 Length. 用边缘生成Wall(带净高) 拉伸 Wall 续 还可以使用相切连续的曲线拉伸 Rolled Walls Wall Recognition Walls Recognition Definition dialog box 转化 Bend Auto Bend Singular Bend Conical Bend Bend From Flat 修改 Bend 半径 Corner Relief User Corner Relief 凸边（Flanges） 单个 Flanges Hem Bends Tear Drop Flanges Swept Flanges 创建 Cut Out Corners 可选择 : 所有凸边 所有凹边 Chamfers 在锐边或 焊接区域定义 阵列 Cut Out 在Flat Pattern 模式下创建 Cut Out 点式 孔型 曲线型 面型 桥型 天窗型 加强筋型 User-Defined Stamping Feature 出图 编辑修改 修改示例 续 修改 Flange 创建Power Copy 使用Power Copy Load the Catia document ‘CATSMDJALouver.CATPart‘ Load the Catia document ‘CATSMDJAStiffening_Rib.CATPart‘ Job aid for process (specific background) Lesson overview Lesson overview Job aid (specific icon): title of task + numbered actions + image(s) (background with no arrow) Load the Catia document ‘CATSMD.JAMaterial_Parameters.CATPart‘ Load the Catia document ‘CATSMD.JAMaterial_Parameters.CATPart‘ Lesson overview Lesson overview Lesson overview Load the Catia document ‘CATSMDJAProfile_Walls.CATPart‘ Load the Catia document ‘CATSMDJAEdge_Walls.CATPart‘ Load the Catia document ‘CATSMDJAExtrude_Walls.CATPart‘ Lesson overview Load the Catia document ‘CATSMDJARecognize_Walls.CATPart‘ Lesson overview Lesson overview Load the Catia document ‘CATSMDJAAuto_Bends.CATPart‘ Load the Catia document ‘CATSMDJASingular_Bend.CATPart‘ Load the Catia document ‘CATSMDJASingular_Bend.CATPart‘ Lesson overview Load the Catia document ‘CATSMD.JASimple_Flanges.CATPart‘ Load the Catia document ‘CATSMD.JAHem_Bend.CATPart‘ Load the Catia document ‘CATSMD.JATear_Drop_Flange.CATPart‘ Load the Catia document ‘CATSMD.JASwept_Flange.CATPart‘ Load the Catia document ‘CATSMDJACreating_Cutouts.CATPart‘ Load the Catia document ‘CATSMDJAPatterning_Cutouts.CATPart‘ Load the Catia document ‘CATSMDJAFlat_Mode.CATPart‘ Lesson overview Load the Catia document ‘CATSMDJAPoint_Stamp.CATPart‘ Load the Catia document ‘C