注塑成型技术概述.ppt

* 3 Injection Molding Process The injection molding process is relatively simple. Resin is melted, forced into a cold mold at high pressure, cooled, and then ejected from the mold. Let’s take a little more time to look at this process further. First, resin enters the hopper and then is plasticated. It is plasticated by a revolving screw located in a heated barrel. The screw moves back to develop the necessary shot size. Next, the mold closes, then the Screw is moved forward to force the molten polymer through the melt delivery system and into the cold mold. This is usually accompanied b