土木工程专业毕业设计计算书研究报告.doc

毕业设计（论文） 题 目 学 院 建筑工程学院 专业班级 学生姓名 学号 指导教师 职称 评阅教师 职称 2010年月日 学生毕业设计（论文）原创性声明 本人以信誉声明：所呈交的毕业设计（论文）是在导师的指导下进行的设计（研究）工作及取得的成果，设计（论文）中引用他（她）人的文献、数据、图件、资料均已明确标注出，论文中的结论和结果为本人独立完成，不包含他人成果及为获得重庆科技学院或其它教育机构的学位或证书而使用其材料。与我一同工作的同志对本设计（研究）所做的任何贡献均已在论文中作了明确的说明并表示了谢意。 毕业设计（论文）作者（签字）： 年 月 日  摘 要 根据设计规范和其它相关标准，以及设计要求和提供的地质资料，设计该框架结构。 按照先建筑后结构，先整体布局后局部节点设计步骤设计 ABSTRACT Office design specifications and other relevant standards and design requirements and provide geological data, the design office of the frame structure. In accordance with the structure after the first building, the first overall layout of the design steps of the local node design.Wangmo, Guizhou Province Construction Commission office in this building design, the frame structure, construction area of 1685m2, the total building height is 14.4m, the main building for the three-tier, local four-story. Indoor and outdoor height difference of 0.45m. The seismic intensity of 7 degrees, three seismic rating. Structural type of the frame structure, wall coagulation hollow earth block.Vertical column of the building size is 5.7m, 2.7m and 6m, lateral 7.8m bottom and the layers are high 3.9m.The top floor of the building furnished with a large conference room of approximately 200 square meters area, the other layers are less than 70 square meters area of office design. Stairs plate stairs, all the fire stairs, the basis for an independent basis and double column basis. In the whole process of architecture design, compliance with the principle of applicable, beautiful, economic and reference national standards and relevant materials, strictly follow the design specification of relevant architecture and consider each segment about design comprehensively. Architecture design content includes architecture graphic design, facade design, section des