基于北斗导航的校车监控系统的设计剖析.docVIP

  • 8
  • 0
  • 约6.42千字
  • 约 23页
  • 2016-06-24 发布于湖北
  • 举报

基于北斗导航的校车监控系统的设计剖析.doc

学号 1410 毕业设计(论文) 题目: 基于 作 者 刘洪波 届 别 2014 院 别 信息与通信工程学院 专 业 指导教师 职 称 完成时间 2014年5月 摘 要 近年来,我国发生了多起校车交通事故,给社会带来了不良的影响。为了防止这类悲剧的发生,设计了基于北斗导航的校车监控系统的设计,该系统可以识别校车司机身份、检测校车内的人数和校车的速度,对车内空气质量检测、北斗卫星定位。以STM32F4为控制核心的下位机一旦检测到校车运行异常,将进行语音报警提醒并将信息通过GPRS模块发送给后台校车监控中心,在上位机Labview平台上实时显示校车运行状况和监控,从而有效的避免了财产损失和人员伤亡。 关键: Abstract In recent years,there were numerous traffic accidents relating with school bus which has been adversely effects on society. In order to prevent such tragedies from occurring,we put forward akind of school bus monitoring system based on beidou navigation system which has driver identify recognition,people counting,speed detection,air quality monitoring and the COMPASS position.Once detecting the school bus works abnormal,the slave computer that regards STM32F4 as its controller will conducts voice alarm to remind the driver and send the information to the school bus monitoring center throug the GPRS module.On the labview platform of the master computer,it can achieves the real-time display of the present running situation of the school bus and monitoring it.Thus,the property and casualties of theschool bus can be avioded effectively. Key words: The school bus;GPRS;Monitoring; beidou 目 录 摘 要 I Abstract II 第一章 绪论 1 1.1 课题研究背景 1 1.2 国内外研究现状 1 1.3 本文的主要工作 2 第二章 系统方案设计 3 2.1 系统总体方案 3 2.2 系统功能介绍 4 2.3 主控芯片介绍 4 第三章 系统设计与实现 6 3.1 硬件电路设计 6 3.1.1 密码按键模块 6 3.1.2 人数检测模块 6 3.1.3 温湿度检测模块 7 3.1.4 北斗模块 7 3.1.5 语音模块 8 3.1.6 GPRS模块 9 3.1.7 运动传感器 10 3.2软件系统设计 10 3.2.1 上位机设计 10 3.2.2下位机设计 11 第四章 系统测试 12 4.1 系统使用说明 12 4.1.1下位机操作 12 4.1.2上位机操作 13 4.2 系统测试结果与分析 14 第五章 总结和展望 17 参考文献 18 致 谢 19 第一章 绪论 1.1 课题研究背景 1.2 国内外研究现状 1.

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档