基于单片机的只能温湿度控制系统设计剖析.doc

中国地质大学 本 科 毕 业 设 计 题 目: 基于单片机的智能温湿度控制器的设计 系 别 信息工程系 学生姓名 XXX 专 业 电气工程及其自动化 学 号 XXX 指导教师 XXX 职 称 高级工程师 2015 年 05 月 20 日基于单片机的控制系统设计ABSTRACT In daily life, the measurement and control of temperature and humidity can be said that the application in various fields are very extensive. This paper introduces a temperature and humidity control system which can be used as the core component of the single chip microcomputer STC89C52 as the core component.. By STC89C52 single-chip formed field measuring and control unit, using the digital temperature and humidity sensor SHT11 temperature and humidity measurement, collected temperature and humidity value in the real-time display in 1602 LCD, real-time monitoring, three buttons to set the design can be on the measurement to the temperature and the humidity control interval set (is preset temperature and humidity range). This system according to the need of human and set upper and lower limits of the parameters value, so as to achieve automatic adjustment of temperature and humidity, and can through the measured value and set value of compared to start corresponding to the relay, such as when the actual temperature is below the preset temperature is lower, at a heating control circuit system to external heating. 1602 liquid crystal used for uplink and downlink, the top row of display is the current temperature and humidity values, the bottom row shows is the humidity control range, press the set button, the system can carry out the temperature and humidity between switching, in the setting of instructions. In order to facilitate the user identification, press the setting button, can make the temperature and humidity upper and lower limit of the switch between. When temperature and humidity are over the setting of temperature and humidity, the sound and light alarm device is the same as the alarm, which p