毕业设计——带侧抽芯肥皂盒的模具设计剖析.docVIP

南 京 工 程 学 院 专 接 本 毕业设计说明书(论文) 作 者： 孙凡凡 学 号： 101031231 学院（系、部）： 精密制造工程系 专 业： 数控加工与模具设计 题 目： 带侧抽芯肥皂盒的模具设计 指导者： 陆宝山 评阅者： 2014 年 【摘要】 塑料成型包括了如热塑性塑料的成型和热固性塑料的成型。热塑性塑料成型最为重要，也是应用较为广泛的一种成型方式，它包括注射成型，挤出成型，吹型成型，吸塑成型等。这个主题主要是我完成了横向核心肥皂盒的注塑模具结构设计。首先,通过查阅相关文献资料,对零件可制造性分析,选择和确定对应于给定条件的最优过程计划,技术和设计相关计算,根据我们所学到的知识在学校期间做肥皂零件图的分析,在设计、建立注入的相关参数,建立了模具设计使用“”结构。最后,通过学习从最近阶段完成注塑模具的整体结构设计和分析一些处理等等。 【 abstract 】Plastic molding including the molding of thermoplastic and thermosetting plastic molding.Thermoplastic plastic molding is applied more widely, a forming method including injectionmolding, extrusion molding, blow molding, vacuum forming, etc. This topic is mainly tocomplete the soap box with lateral core injection mould structure design. First of all, through consulting the related literature material, for part manufacturability analysis, select and determine corresponds to a given conditions of the optimal process plan, and related to the design of the process calculation, after the design, establish the related parameters of injection, and establish the mold design using exactly one structure. In the end, by learning from recent stage, complete the whole structure of the injection mold design and the analysis of some processing and so on. This topic of core-pulling measurement part of the difficulty lies in the soap box, you all know theres a pair of mold if core-pulling, then, and all aspects of the mold will have great difficulty. This paper, I mainly from product design to the design of the mould, then at the end of the intensive processing, design concept to the actual. Draw the sketch with GU first, and then by stretching, chamfering, such as poor pump shell,and trim out to design products with UG injection mold wizard, complete the design of the product. Main p