03罗格朗智能家居环境控制系统培训之自动控制篇PARTA解说.ppt

* The flush mounting, DIN or Basic actuators can be controlled: - independent loads with electromechanical relays that are all loads that work in ON-OFF modality (lamps, fans etc.); - interlocked loads that are all loads that work in OpenClose modality (curtains, shutters etc.) - lamps that need to be regulated. Commands The flush mounting, DIN or Basic actuators must be controlled by commands: Special commands such as Touch Screen or scenarios module Standard commands IR commands Badges. Next slide: interfaces. * The flush mounting, DIN or Basic actuators can be controlled: - independent loads with electromechanical relays that are all loads that work in ON-OFF modality (lamps, fans etc.); - interlocked loads that are all loads that work in OpenClose modality (curtains, shutters etc.) - lamps that need to be regulated. Commands The flush mounting, DIN or Basic actuators must be controlled by commands: Special commands such as Touch Screen or scenarios module Standard commands IR commands Badges. Next slide: interfaces. * The flush mounting, DIN or Basic actuators can be controlled: - independent loads with electromechanical relays that are all loads that work in ON-OFF modality (lamps, fans etc.); - interlocked loads that are all loads that work in OpenClose modality (curtains, shutters etc.) - lamps that need to be regulated. Commands The flush mounting, DIN or Basic actuators must be controlled by commands: Special commands such as Touch Screen or scenarios module Standard commands IR commands Badges. Next slide: interfaces. * The flush mounting, DIN or Basic actuators can be controlled: - independent loads with electromechanical relays that are all loads that work in ON-OFF modality (lamps, fans etc.); - interlocked loads that are all loads that work in OpenClose modality (curtains, shutters etc.) - lamps that need to be regulated. Commands The flush mounting, DIN or Basic actuators must be controlled by commands: Special commands such as Touch Scr