IdeaPad S10-3s 拆装介绍.pptVIP

Page * of 45 Title change by using View Slide Master | Lenovo Confidential | ? 2008 Lenovo LENOVO CONFIDENTIAL LENOVO CONFIDENTIAL LENOVO CONFIDENTIAL LENOVO CONFIDENTIAL Lenovo Confidential | ? 2008 Lenovo IdeaPad? S10-3s 拆装介绍 Analysis 1. Release battery lock and latch, take the battery out of computer. Analysis 2. Loosen 3 screws of keyboard, and unsnap 4 latches to take the keyboard out of upper case 3X SCREWS M2*L2 Analysis 3. Remove the 6 screws of lower case and 4 screws on the keyboard plate 4X SCREWS M2*L5 6X SCREWS M2*L8 Analysis 4. Distribute the lower case from system module; L-CASE SYSTEM Analysis 5. Remove 2 screws form two hinges and open them; 6. Unplug the cables of the antenna and CCD then take them out from the orbits; 7. Unplug the LCD cable from system module; 2 X SCREWS M2*L5 Analysis 8. Distribute the system module and the LCD module SYSTEM MODULE LCD MODULE Analysis 9. Take the HDD away from system module; 10. Remove a screw of mini-card then take it away; 11. Take the DIMM away from system module; 1X SCREW M2*L3.5 Analysis 12. Remove 2 screws of fan then loosen the cable connector and take it away; 13.Loosen the blue-tooth cable and remove it; 2X SCREWS M2*L3.5 BLUE TOOTH CONNECTOR Analysis 14. Remove four screws from MB board and two of I/O board 1X SCREW M2*L2 UNDER KEYBOARD 5X SCREWS M2*L3.5 Analysis 15. Loosen the FFC touch pad cable and speaker cable connectors ; Analysis 16. Remove the MB board and I/O board form the upper case; 17. Loosen two connectors of the cable and distribute them; Analysis 18. Remove two screws of touch pad bracket and take it away from upper case; TOUCH PAD BRACKET 2X SRCEWS M2*L2 Analysis 19. Push these two hooks then loosen it away from upper case; TOUCH PAD COVER Analysis 20. Remove two screws of speaker then distribute it from upper case; 2X SCREWS M2*L3 SPEAKER 21. Remove 4 rubbers from LCD bezel; Analysis Analysis 22. Remove 4 screws on the bezel then take it out of LCD module; 4X