内蒙某二级公路工设计(A标段)计算书.docVIP

内蒙某二级公路工程设计（A标段） 摘 要 本设计为A标段（总长8.8km）工程施工图设计，首先根据工程设计要求确定本道路等级为二级公路。本公路设计速度60km/h、路基宽度10m，车道宽度4.25×2m,交通工程及沿线设计等级为B级。 对已给的设计资料进行了分析，查找相应的技术规范，确定了设计需要的各种参数。在平面图中进行选线，然后又对道路路线进行了平面设计，本路线有两段曲线设置缓和曲线，并设置超高。纵断面设计中满足了平纵面线性组合设计中的各种要求。在横断面设计中，确定了横断面组成及各种要素后，绘制横断面图。路基设计的基本内容，是确定路基边坡的形状和坡度。路面设计内容包括路面类型和结构设计。 通过本次设计不但了解了设计公路的各种步骤，而且也能熟练地运用AUTOCAD进行制图，同时也学会了应用纬地道路设计软件。本设计部分采用软件设计分析。设计包括线形设计，平纵横断面设计，路基路面（沥青路面）设计，路基防护，排水系统和沿线设施设计。 关键词：二级道路 线形设计 沥青路面 排水系统 Abstract This design is line section A sign section（Total length 8.8km）Engineering design，First of all, according to the engineering design requirements sure this road was grade secondary road。The highway design speed was 60km / h, roadbed width 10m, road width 4.25 * 2m, traffic engineering and design along the grade of Class B。 Have been designed to give the data were analyzed to find the appropriate technical specifications to determine the needs of the various design parameters. In plan view for line selection, and then carried out on the road alignment graphic design, this route has two transition curve settings and set high. Profile met the flat vertical surface in the design of linear combination design of the various requirements. In the cross-sectional design, make sure that the various elements of composition and cross section after section view drawing. The basic content of the roadbed design is to determine the shape and slope of embankment slope. Pavement design content including road type and structure design. Through this design not only to understand the various steps of the design of roads, but also be proficient in the use of AUTOCAD for drawing, but also learned to apply weft to road design software. The design part is the software design and analysis。Design includes geometric design，Flat cross-section design，Foundation and Pavement（asphalt pavements）Design，Sugared protection，Drainage system and Along the facility design。 Keywords：The secondary roads ; Linear design ;Asphalt pavement; Drain