蜗轮壳的三维造型虚拟数控加工设计.docVIP

e 题 目 蜗轮壳的三维造型及虚拟数控加工设计 学生姓名 e 学号 e 所在学院 机械工程学院 专业班级 e 指导教师 e ____ __ 完成地点 ___ 2009 年 6 月 日 蜗轮壳的三维造型及虚拟数控加工设 e （e） 指导教师：e 【摘要】本文设计的内容可分为蜗轮壳的机械加工工艺规程设计、蜗轮壳实体造型和仿真加工，三大部分。在蜗轮壳加工工艺规程的设计中，首先对零件进行分析，根据零件的材料，生产纲领及其它来确定毛坯的制造形式；其次进行加工基面的选择与工艺路线的制订；最后进行加工余量、工序尺寸及切割用量等的计算与确定。箱体的实体造型与仿真加工设计部分主要是在软件Pro/E中的NC模块下进行，通过工件及夹具的不同位置来创建一系列的快照，再将快照按一定的顺序排列，然后制作零件的虚拟加工。 【关键词】蜗轮壳 加工工艺 实体造型 仿真加工 Worm gear case of the entity modeling and simulation processing design e (e) Tutor：Abstract: This design can be divided into the content of the worm gear box of the machining process planning design, the worm gear case solid modeling and simulation processing, three parts. In the design of worm gear case machining process planning, firstly analyze the parts according to the materials parts productions platform and other forms to determine the manufacture of blank; Secondly carry on the processing on the surface of the base choice and the craft route formulations; Finally carries on the machining allowance, process dimensions and cutting, such as the dosage of calculation and determined. Box solid modeling is mainly conducted in Pro/E entity model. Simulation processing design part mainly under the “animation” modules of software Pro/E , through the different location of the workpiece and fixture to creat a series of snapshots, the snapshot again according to certain order, and then make a part of virtual machining. Key words: Worm gear case; Processing technology; Entity modeling; The simulation process 目 录 1绪 论 1 1.1 课题背景、展望 1 1.2 意义 1 2零件的分析 3 2.1零件的作用 3 2.2零件的工艺分析 3 3 零件工艺规程设计 5 3.1 确定毛坯的铸造形式 5 3.2 基准的选择 5 3.2.1基面选择 5 3.2.2粗基面的选择 5 3.2.3精基面