通信工程专业毕业文--基于89C52RC的MODBUS通信程序设计.docVIP

通信工程专业毕业论文--基于89C52RC的MODBUS通信程序设计 ABSTRACT The MCU has the advantages of small size,low cost, wide range of applications; temperature control systems use a single-chip system design. 89C52RC MODBUS communication program is designed for the temperature control system. Mainly use AT89C52 chip AD590 temperature sensor, temperature detection and display functions and programming of MCU and PC connection, and then through the MODBUS protocol to regulate and control the PC charged with the temperature of the scene. There are two aspects of design, hardware circuit design and software programming. The hardware circuit design, including the man-machine interchangeable modules including key module and digital display module. The key module is used to enter the set temperature; the digital display module is used to display the current measured temperature. The temperature sensor module consists of the A / D converter module and sensor module. Heating control module is used for water heating. The host computer communication module through the serial port and PC to establish communication channels.The software design includes temperature detecting module, the heater control module, keyboard module, digital tube display module and serial port driver module. Temperature detection module temperature values by the A / D converter to convert the numeric value stored, the heater control module controls the heater switches off, the button module is used to set the temperature value; the digital control module is used to display the detected temperature value and the temperature set value, the serial port driver module used to send and receive data from the host computer. Key words：AT89C52 ,Modbus protocol ,Temperature control 目 录 前 言 1 第1章 绪论 2 第1.1节 选题背景 2 第1.2节 选题简介 2 第2章 总体设计的技术分析 3 第2.1节 AT89C52单片机 3 单片机的发展 3 芯片的选择 4 AT89C52功能简介 5 第2.2节AD590温度传感器 9 第2.3节 AD0804模数转换原理 10 第2.4节 MODBUS协议 11 通讯传送方式 12 通讯规约 12 Modbus帧描述 13 第2.4节　RS232简介 14 第3章 硬件设计 16 第3.1节 系统结构 16 第3.2节 单片