(贝克休斯的关于裸眼封隔器的)绪论.pptVIP

MPas? New Era Open Hole Packers MPas? Packer Design MPas? Open Hole Packer Sequence MPas? Open Hole Packer Sequence MPas? Open Hole Packer Sequence SSC Location : Timor Sea, AustraliaOperator : ConocoPhillipsField : Bayu UndanDate : 1st well May 2004# Wells : 3# MPas Packers : 26 (10, 8, 8)Max Deviation : 62 DegreesMax Depth : 10,352 ft TVDMax Temperature : 270 Deg FJob Description : Isolation for water shut off One-Trip System with SelectSet Collet tool run as an integral part of the inner string. Packers set in low-permeability silt stringers to enable future shut-off of water as it ingresses.~4.5 hours from TD to set and individually test each of packer. Location : Saudi ArabiaOperator : ARAMCOField : Zuluf Main SandDate : December 2002# Wells : 1# MPas Packers : 4Max Deviation : 90 DegreesMax Depth : 6,500 ft TVDMax Temperature : 200 Deg FJob Description : One-Trip System with MAIC tool run as an integral part of the inner string. Packers used to increase production capabilities of equaliser screen. PLT run and isolation proven. Max Temperature 270oF Max Dogleg Severity 8o/100ft Max Measured Depth 20,682 ft Max Total Vertical Depth 13,500 ft Max Deviation 93.1o Max Deviation at Packer 89.5o Max Mud Weight 10.6ppg REPacker The water reactive section consists of water absorbing particles incorporated in a field proven Nitrile-based polymer. These particles swell via absorbing water which in turn expands the rubber without being physically absorbed into the rubber matrix which can adversely effect properties The oil reactive section utilizes oleophillic polymers that absorb hydrocarbons into the matrix. This process is a physical uptake of the hydrocarbon which swells, lubricates and decreases the mechanical strength of the polymer chain as it expands. REPacker – Features Benefits Simple deployment, requires no running tools Simple installation, no special personnel required No moving parts R