全自动擦鞋机的毕业机械CAD图纸设计.doc

全自动擦鞋机设计 机械工程系 [摘要]：全自动擦鞋机设计是一个非常有发展潜力和市场空间的课题。就目前国内市场上已经出现的擦鞋机而言，真正能做到全自动的擦鞋机几乎没有。参考“星月神”牌擦鞋机，就可以发现，它们普遍采用单一的马达减速带动毛毡旋转，若要做到全方位擦鞋，脚必须主动去适应旋转马达，整个擦鞋过程非常繁琐。鉴于此，我在张老师指导下对传统擦鞋机进行了一系列改良，虽然目前只停留在理论阶段，但是通过对各个部分的结构分析计算可以看出，这个理论完全有实现的可能。本次设计只用到齿轮系以及带传动，可以完成的动作包括旋转、曲线的来回移动以及水平来回移动。这三部分分别解决了鞋子前部分、后侧面部分擦拭和鞋码大小不一的问题。擦鞋机减速机构采用开式齿轮传动，皮带材料为聚氨酯，固定部分为角钢和轴承座，因为负载小，所以对材质要求并不苛刻。擦鞋机所有运动的实现不用到任何精密电子元件，几乎不受环境要求的限制，对灰尘、油污不敏感，可以广泛应用于人流量较大的超市，甚至于露天的市场。 [关键词]：擦鞋机；毕业设计；实用课题；减速器 Automatic Shoes-Polishing machine Design Abstract: It is a very potential subject with the space of market that the full-automatic shoes polishing machine is designed. Whom domestic market appear already polish shoes machine but speech at present, really can accomplish polishing shoes machine nearly full-automatic. Consult star monthly god brand polish shoes machine, can find they adopt single motor moderate, drive the felt to rotate generally, if should polish the shoes omni-directionally, the foot must go to adapt to the rotatory motor voluntarily, it is very tedious to polish the course of the shoes entirely. In view of this, I polish the shoes machine and improve a series of to the tradition under the guidance of Mr. Zhang, though only remain at theory stage at present, analyze that calculates that can find out through the structure to each part, this theory is totally possible to realize. Design this use gear wheel department and bring transmission only, sport that can realize course include, rotate, curve movement and competence move back and forth back and forth. These last some shoes ago three part, behind side polishing and shoes yards of uniform size problem partly. Polish shoes machine moderate organization adopt gear wheel transmission of turning on etc., belt material the polyurethane, the standing part is angle steel and bearing seat, because load is small, demand not to be harsh to the material. Polish shoes machine all sport of realizations ne