纸板耐破度仪机械CAD图纸设计.doc

纸板耐破度仪设计 摘 要: 纸板耐破度仪是为检测纸张、纸板、瓦楞纸板的耐破度而生产的专用检测器具，目前普遍使用的耐破度仪匀为缪伦式耐破度仪(又称破裂强度试验机)。本文首先概述了耐破度测试仪的基本定义、分类。然后设计出一款试验机。试验机的传动部分主要由、、组成。经过校核后所有设计均符合要求。用CAD软件完成试验机的。在文章的最后简明的介绍了做本次毕业设计的一些心得体会。关键词: 耐破度 The design of cardboard burst instrument Abstract：For the detection of paper, cardboard, corrugated cardboard bursting and the production of special testing equipment, the current widespread use of breaking resistance of the device to absorb Mullen type bursting foster(also known as the rupture strength testing machine). In this paper, access to a large domestic and international testing machine manufacturer based on the data of the existing cardboard bursting tester test machine was carefully studied, according to the design task book out of the technical requirements of the proposed design of the cardboard bursting mechanical instrument. This paper first outlines the basic definition of bursting strength tester, working principle and classification. By resistance to breaking of the instrument structure compared to existing types of cardboard, and then design a new type of bursting strength testing machine. Test drive part is mainly composed of a gear box, hydraulic transmission, the ball screw is composed of three parts. After checking all the design to meet the requirements. UG three-dimensional modeling software with complete bursting meter three-dimensional modeling, and its doing kinematics simulation, Using CAD software to complete the test machine assembly diagram, then get the tester of 2D part drawings. At the end of the article briefly introduces the graduation design, some experience. Keyword：bursting，worm and gear，corrugated board 目 录 1 引言 1 1.1 纸板耐破度仪概述 1 1.2 耐破强度简介 1 1.2.1 耐破度定义 1 1.2.2 耐破指数 2 1.2.3 耐破度仪国家标准区别 2 1.3 影响纸板耐破度的因素 2 1.4 课题的研究方法和设计思路 4 1.4.1 研究方法 4 1.4.2 设计思路 4 2 纸板耐破度仪的概述 5 2.1 纸板耐破度仪的结构原理 5 2.2 目前常用的几种耐破仪 5 2.2.1 JD-213环压强度试验机 5 2.2.2 JD-211A全自动破裂强度试验机 6 2.2.3 JD-212破裂强度试验机 6 2.2.4 JD-223平压取样器 7 2.2.5 JD-206