基于Mutisim的模拟乘法器的应用设计与仿真.docVIP

基于单片机的智能循迹小车设计 巢湖学院2014届本科毕业论文（设计）  PAGE \* MERGEFORMAT II  PAGE I 巢湖学院2014届本科毕业论文（设计）  PAGE 1 基于Multisim10的模拟乘法器应用设计与仿真 摘 要 作为电子线路仿真与设计的 EDA 工具软件Multisim是其中之一。Multisim在教育教学与生产生活中被广泛应用于电路学习、电路图设计以及模拟仿真。利用Multisim和虚拟仪器技术，可以很好地将理论教学与实际动手实验相结合，可以提高学习的积极性。利用这些虚拟仪器与元器件，为模拟乘法器的电路设计与应用提供了先进的设计方法并且可以预防电路设计中的错误，并模拟预期效果，提高成功性，调试比较方便。 模拟乘法器是对两个模拟信号（电压或电流）实现相乘功能的的有源非线性器件。主要功能是实现两个互不相关信号相乘，即输出信号与两输入信号相乘积成正比。它有两个输入端口，即X和Y输入端口。 设计的主要内容为在Multisim10软件工具下创建集成电路模块，Multisim软件工具提供了原理图输入工具、仿真器和波形分析功能对模拟乘法器构成的电路进行仿真。然后对设计的电路进行测试和仿真结果分析。 关键词：Multisim10；模拟乘法器；仿真 基于Multisim的模拟乘法器应用设计与仿真 基于Multisim的模拟乘法器应用设计与仿真  PAGE II Application of Design and Simulation of Analog Multiplier Based on Multisim Abstract As electronic circuit simulation and design EDA tool software Multisim is one of them. Multisim in education teaching and life are widely used in circuit, circuit design and simulation study. Use Multisim and virtual instrument technology, is a good way to combining theory teaching and practical experiment, can improve the enthusiasm of learning. Use these virtual instruments and components for the circuit design and application of analog multiplier provides advanced design method and can prevent the errors in the circuit design, and simulation of the desired effect, improve the success, debugging more convenient. Analog multiplier is two analog signals (voltage or current) to realize the multiplication function of active nonlinear devices. Main function is to realize the two orthogonal signals multiplication, the output signal is proportional to the product of two input signals. It has two input ports, the X and Y input port. The main content of design for under Multisim10 software tools to create integrated circuit module, Multisim software tools provide principle diagram input tool, simulators and waveform analysis function of analog multiplier circuit simulation. And then to design the circuit testing and the analysis of simulation results. K