《Design of Low Power Multiple Output Power Supply for Embedded Systems》.pptVIP

;1 INTRODUCTION AC-DC CONVERSION TOPOLOGY OVERVIEW BLOCK DIAGRAM OF THE SYSTEM SYSTEM DESIGN RESULTS;This paper presents the design of multiple output power supply from AC power supply that is used as an input to this power supply system. As an Embedded system works on different voltage levels because the sub modules used in any embedded system required different voltage levels as per their specifications, so power supply proposed in this paper produces +15V, -15V, +5V, -5V, +3.3V, +5V Isolated voltage levels. The input for this power supply is 220 Volt AC supply. This AC supply is conver