PLC控制全自动洗衣机设计探析.docVIP

焦作大学机电工程学院 摘要 PAGE  PAGE 34 摘要 目前，全自动洗衣机已十分普及家用电器之一，主要通过开关和电路板来控制洗衣机按照预定动作进行洗涤，属于顺序控制，完全可以通过PLC实现，使洗衣机更加智能化。 可编程控制器（PLC）一微处理器为核心，普遍采用继电接触器控制系统电气原理编程的梯形图语言进行程序设计，编程容易，，修改灵活，而且结构简单，抗干扰能力强。西门子可编程控制器指令丰富，可以接各种输出输入扩充设备，有丰富的特殊扩展设备，其中模拟输入设备和通信设备更是符合全自动洗衣机控制系统的要求与缺点。 本文选择西门子可编程控制器S7-200为核心部件，着重进行硬件接口设计，利用梯形图和语句表进行编程，是实现了全自动洗衣机控制系统的自动化。 关键字：智能化；全自动洗衣机；可编程控制器 焦作大学机电工程学院 Abstract Abstract At present, the automatic washing machine is one of the popular household electrical appliances, mainly through the switch and circuit board to control the washing machine in accordance to a predetermined action for washing, seven control requirements belong to sequence control, and can completely through the PLC, washing machine more intelligent. Programmable controller (PLC) is a microprocessor as the core, is generally used to relay contactor control system electrical principle of ladder diagram programming language to program design, programming, easy to modify, agile, and simple structure, strong anti-jamming ability. Siemens PLC (programmable logic controller) instruction is rich, can meet all kinds of input output expansion equipment, has the rich special extended equipment, among which the analog input equipment and communication equipment is consistent with the requirements of the automatic washing machine control system with faults. This article chooses the Siemens PLC S7-200 as the core components, mainly for hardware interface design, the use of ladder diagram and statements table programming, is to realize the automatic washing machine control system of automation. Key words: intelligent; Fully automatic washing machine; PLC (programmable logic controller) 焦作大学机电工程学院 目录 目录  TOC \o 1-3 \h \z \u  HYPERLINK \l _Toc248050132 第一章 引言  PAGEREF _Toc248050132 \h 2  HYPERLINK \l _Toc248050133 1.1 全自动洗衣机设计目的和意义 3  HYPERLINK \l _Toc248050134 1.2 全自动洗衣机设计项目发展 3  HYPERLINK \l _Toc248050135 1.3 课题概述  PAGEREF _Toc248050135 \h 3  HYPERLINK \l _Toc248050136 1.4